Redding man named head of Cal Fire Record-Searchlight - Redding,CA,USA By Jim Schultz (Contact) SACRAMENTO - A Redding man was named director of the state Department of Forestry and Fire Protection on Wednesday. … See all stories on this topic

$2.2 million grant awarded St. George Fire District 2TheAdvocate - Baton Rouge,LA,USA COM STAFF REPORT The St. George Fire Protection District has been awarded a SAFER grant by the Department of Homeland Security/FEMA/United States Fire … See all stories on this topic

Let’s get tough on fire Business Spectator - Melbourne,Victoria,Australia On television and radio, Fire Protection people are starting to reveal the mistakes made by well-meaning people in the state government, … See all stories on this topic

New York Times Fire Extinguishers From A to C New York Times - United States “People have quite a few questions when it comes to fire extinguishers,” said Timothy Hawthorne, a fire protection specialist at the National Fire … See all stories on this topic

Pinehurst chimney fire causes damage Shoshone News Press - Kellogg,ID,USA Dale Costa, senior firefighter with Shoshone County Fire Protection District 2, reported the original 6:30 pm emergency call stated that flames were seen … See all stories on this topic

Millions of animals dead in Australia fires The Associated Press One furry survivor has emerged a star: a koala, nicknamed “Sam” by her rescuers, was found moving gingerly on scorched paws by a fire patrol on Sunday. … See all stories on this topic

Woodlawn purchases new fire engine Mt. Vernon Register-News - Mt. Vernon,IL,USA By TESA CULLI WOODLAWN — There is a new addition at the Woodlawn Fire Protection District, and the volunteer fire fighters are looking forward to … See all stories on this topic

Cops and Courts: Feb. 11, 2009 San Jose Mercury News - CA, USA It didn’t take long for Central Fire Protection District firefighters to knock down a minivan fire Monday night. The fire in the engine compartment of the … See all stories on this topic

Live fire experiments examine impact of changes in firefighting … Science Centric - Sofia,Sofia Town,Bulgaria Fire is a costly problem. According to the National Fire Protection Association, in 2007 there were 530500 structure fires that killed 3000 civilians and … See all stories on this topic

Blogs Roundup: fire protection

Blogs Alert for: fire suppression

Q: Are space heaters safe to use in the cubicle at work? How often do space heaters cause fires?

A: Statistics that the Seattle Fire Department submits to the National Fire Protection Association do not specify the number of fires caused by space heaters. But they can be dangerous, fire officials said.

The following information is from Edna Merrick of the department’s Public Education Unit:

Heating equipment is a leading cause of home fires during the months of December, January and February. Two out of three reported home-heating fires and associated deaths and injuries involved portable and fixed space heaters and related equipment, such as fireplaces and chimneys.

Although portable heaters are often a convenient source of heat both at home and work, portable heaters can also be a serious fire hazard if used carelessly.

Portable heating devices warm up rapidly, and like baseboard heaters, they can easily ignite any flammable item left nearby.

Common sense can prevent a portable heater fire. Any time a flammable object comes in contact with a heater, a fire could result. As a rule, all portable heaters are placed at least 3 feet from bedding furniture, and other flammable materials.

Portable heaters should always be plugged directly in the wall, not into an extension cord. Always ensure that portable heaters are turned off when you leave the room or before going to bed.

When shopping for a portable heater, choose a model with temperature control, an automatic shut-off device, and a seal of approval from an independent testing laboratory (such as Underwriters Laboratories), indicating that the portable heater has met basic safety standards.

For more information, click here.

Resource: http://blog.seattlepi.nwsource.com/seattle911/archives/159970.asp

Class A extinguishers can put out fires from “ordinary combustibles” such as wood, plastic or paper. Class B can put out burning liquids such as gasoline or grease. Class C can put out electrical fires. Extinguishers marked A, B and C can put out all types. Class D extinguishers, designed to put out burning metal, are rare. Check the letters and pictures on your extinguisher to find out what it can handle.

Water is the most familiar extinguishing material, and it is one of the most effective. But it can be dangerous in the wrong situation. A water extinguisher can put out things like burning wood, paper or cardboard, but it does not work well on electrical fires or fires involving inflammable liquids. In an electrical fire, the water may conduct the current, which can electrocute you. Water will only spread out an inflammable liquid, which will most likely make the fire worse.

One popular extinguisher material is pure carbon dioxide. In a carbon dioxide extinguisher, the carbon dioxide is kept in pressurized liquid form in the cylinder. When the container is opened, the carbon dioxide expands to form a gas in the atmosphere. Carbon dioxide gas is heavier than oxygen, so it displaces the oxygen surrounding the burning fuel. This sort of fire extinguisher is common in restaurants because it won’t contaminate the cooking equipment or food.

The most popular extinguisher material is dry chemical foam or powder, typically made of sodium bicarbonate (normal baking soda), potassium bicarbonate (nearly identical to baking soda), or monoammonium phosphate. Baking soda starts to decompose at only 158 degrees Fahrenheit (70 degrees Celsius), and when it decomposes, it releases carbon dioxide. The carbon dioxide, along with the insulation of the foam, works to smother the fire.

Most fire extinguishers contain a fairly small amount of fire-suppressant material — you can use it all up in a matter of seconds. For this reason, extinguishers are only effective on relatively small, contained fires. To put out a larger fire, you need much bigger equipment — a fire engine, for example — and the professionals who know how to use it. But for the dangerous flames that can pop up in your house, a fire extinguisher is an invaluable lifesaver.

Resource:  How Stuff Works - Fire Extinguishers

• The best way to remove heat is to dump water on the fire. This cools the fuel to below the ignition point, interrupting the combustion cycle. 
• To remove oxygen, you can smother the fire so it is not exposed to air. One way to smother a small fire is to cover it with a heavy blanket. Another way is to dump nonflammable material, such as sand or baking soda on top of it. 
• Removing the fuel is the most difficult approach for most fires. In a house fire, for example, the house itself is potential fuel. The fuel will only be removed once the fire has burned all of it up.

Fire extinguishers are sturdy metal cylinders filled with water or a smothering material. When you depress a lever at the top of the cylinder, the material is expelled by high pressure, similar to the way material is forced out of an aerosol can. The diagram below shows a typical design.

In this extinguisher, a plastic siphon tube leads from the bottom of the fire-suppressant reservoir to the top of the extinguisher. A spring-mounted valve blocks the passageway from the siphon to the nozzle. At the top of the cylinder, there is a smaller cylinder filled with a compressed gas — liquid carbon dioxide, for example. A release valve keeps the compressed gas from escaping.

Most dry-chemical fire extinguishers have a built-in pressure gauge. If the gauge indicator is pointing to “recharge,” the pressure in the extinguisher may be too low to expel the contents. The National Fire Protection Association recommends having dry extinguishers inspected every six years, even if the gauge indicates correct pressure.

To use the extinguisher, you pull out the safety pin and depress the operating lever. The lever pushes on an actuating rod, which presses the spring-mounted valve down to open up the passage to the nozzle. The bottom of the actuating rod has a sharp point, which pierces the gas cylinder release valve.

The metal safety pin prevents the operating lever from closing accidentally.

The operating lever pushes down on an actuating rod (the blue piece).

The compressed gas escapes, applying downward pressure on the fire-suppressant material. This drives the material up the siphon and out the nozzle with considerable force. The proper way to use the extinguisher is to aim it directly at the fuel, rather than the flames themselves, and move the stream with a sweeping motion.

Resource: How Stuff Works - Fire Extinguishers

In this article, we’ll see exactly what fire extinguishers do and how they do it. We’ll also find out what causes fire in the first place, learn the correct way to use an extinguisher and see what sort of fire suppressant works best on different types of fires. Fire is the result of a chemical combustion reaction, typically a reaction between oxygen in the atmosphere and some sort of fuel (wood or gasoline, for example). Of course, wood and gasoline don’t spontaneously catch on fire just because they’re surrounded by oxygen. For the combustion reaction to take place, the fuel has to be heated to its ignition temperature.

Fire is the result of a chemical combustion reaction, typically a reaction between oxygen in the atmosphere and some sort of fuel (wood or gasoline, for example). Of course, wood and gasoline don’t spontaneously catch on fire just because they’re surrounded by oxygen. For the combustion reaction to take place, the fuel has to be heated to its ignition temperature.­

­Here’s the sequence of events in a typical wood fire:

• Something heats the wood to very high temperatures. This could be any number of things — focused light, friction, something else that is already burning.  
• When the wood reaches about 500 degrees Fahrenheit (260 degrees Celsius), the heat decomposes some of the cellulose material that makes up the wood.  
• Decomposed material is released as volatile gases, typically a compound of hydrogen, carbon and oxygen.  
• When the gas is hot enough, the compound molecules break apart, and the atoms recombine with the oxygen to form water, carbon dioxide and other products.  
• The gases, which rise through the air, make up the flame. Carbon atoms rising in the flame emit light as they heat up. (Check out How Light Bulbs Work to find out why heated objects emit light.)  
• The heat of the flame keeps the fuel at the ignition temperature, so it continues to burn as long as there is fuel and oxygen.

As you can see, there are three essential elements involved in this process:

• Extreme heat
• Oxygen (or similar gas)
• Fuel

­­Fire extinguishers are designed to remove at least one of these elements so that a fire will die out. There are several different ways of doing this, as we’ll see in the next section…

Resource: How Stuff Works - Fire Extinguishers